Board type
  • Single
    piece
  • Panel by
    Customer
  • Panel by
    PCBgogo
Route Process
 
  • Panel as
    V-Scoring
  • Panel as
    Tab Route
  • Both V-Scoring
    &Tab-routing
X-out Allowance in Panel
 
  • Accept
  • No Accept

Panel requirements

Edge Rails
  • NO
  • YES

(e.g. Panel in 2*3, size of the break-away rail,
total 5 panels=total 30 individual boards)

Different Design in Panel
Size (single)
inch"↔mm  
Quantity (single)
 
Layers
 
  • 1 Layer
  • 2 Layer
  • 4 Layer
  • 6 Layer
  • 8 Layer
  • 10 Layer
Copper layer
 
  • Top layer
  • Bottom layer
  • None
Soldermask
 
  • Top side
  • Bottom side
  • Both sides
  • None
Silkscreen Legend
 
  • Top side
  • Bottom side
  • Both sides
  • None
Material
 
  • Normal
    FR-4 Board
  • Aluminum
    Board
  • Flexible
    Board
FR4-TG
 
  • TG 130-140
  • TG 150-160
  • TG 170-180
Structure of MCPCB
 
  • Metal core
    in the middle
  • Metal base on
    the bottom side
Thickness
Unit: mm
  • 0.4
  • 0.6
  • 0.8
  • 1.0
  • 1.2
  • 1.6
  • 2.0
  • 2.4
Min Track/Spacing
 
  • 4/4mil
  • 5/5mil
  • 6/6mil
Min Track/Spacing
 
  • 0.2mm
  • 0.25mm
  • 0.3mm
  • No Drill
Solder Mask
 
  • Green
  • Red
  • Yellow
  • Blue
  • White
  • Purple
  • Black
  • Matt black
  • Matt green
  • None
Solder Mask
 
  • White
  • Black
  • None
Gold Fingers
  • NO
  • YES
Bevelling
 
  • No
  • Yes(30°)
  • Yes(45°)
Surface Finish
 
  • HASL with lead
  • HASL lead free
  • Immersion gold
  • OSP
  • Hard Gold
Tick “Yes” to replace “HASL” to “ENIG”
without any additional charges. Thank You
  • NO
  • YES
Via Process
 
  • Tenting vias
  • Plugged vias
  • Vias not
    covered
Finished Copper
 
  • 1 oz. Cu
  • 2 oz. Cu
  • 3 oz. Cu
  • 4 oz. Cu
+ Add PO No.
 
Other Special Request
 

Fill in the details so that we can know what's your requirements.

Other Special Request

(Castellated holes, edge plating, impedance control,buried/blind vias)

Peelable Soldermask
UL Marking
  • Half-cut/Caste
    llated Holes
  • Edge Plating
  • Impedance
    control
  • Buried/
    blind vias
  • Custom
    Stackup
  • Carbon
    Mask
  • Via in pad
  • Via filled
    with resin
  • Countersinks/
    Counterbores
  • Z-axis
    milling